Newsletter #218 | News
Turbomeca (Safran) delivered the first production Arrius 2R engine to Bell Helicopter
Turbomeca delivered the first production Arrius 2R engine to Bell Helicopter in August 2015, on schedule. More than 350 letters of intent have already been signed for the Bell 505 Jet Ranger X.
Turbomeca, September 04, 2015 - Bordes, France by Philippe Stroppa - Turbomeca (Safran) delivered the first production Arrius 2R engine to Bell Helicopter in August 2015, on schedule.
Selected to power the Bell 505 Jet Ranger X, the Arrius 2R is the only turbine in the 500 shp range to feature a dual-channel FADEC. With seven million flight hours already logged by Arrius variants, the 2R will also offer an unmatched level of maturity at entry-into-service.
The handover to Bell Helicopter happened at the new Bell 505 assembly center in Lafayette, Louisiana and marks a major step in the Arrius 2R program. It confirms Turbomeca's commitment to delivering best-in-class engine solutions on time.
Jean-François Sauer, Arrius 2R Program Vice President, said: "We are perfectly on track to meet Bell Helicopter's expectations, and moving at a steady pace towards EASA engine certification by the end of 2015. Delivering on the Arrius 2R program is among Turbomeca's top priorities."
Launched in 2013, the Arrius 2R is following a fast development schedule that has successfully passed on schedule all its milestones, among which first ground run (April 2014) at the company's Bordes factory, and a first flight aboard the Bell 505 at Bell Helicopter's Mirabel facility in November 2014.
The Arrius 2R is designed to deliver performance and power within the 500 shp range, while improving safety and lowering pilot workload via the FADEC. Its twin-module configuration offers low maintenance and operating costs.
Further production Arrius 2R will be assembled at Turbomeca USA's facility in Dallas, Texas and integrated in Lafayette, Louisiana.
To date, more than 3,000 Arrius engines have been sold by Turbomeca, to 430 customers in 60 countries. Reliability is built into the 2R and reinforced by a 3,000 hour Time-Between-Overhaul offered at service entry. The new variant will also benefit from Turbomeca's renowned service and support capabilities.
More than 350 letters of intent have already been signed for the Bell 505 Jet Ranger X.
About Turbomeca (Safran) is the leading helicopter engine manufacturer, and has produced 70,000 turbines based on its own designs since the company was founded. Offering the widest range of engines in the world and dedicated to 2,500 customers in 155 countries, Turbomeca provides a proximity service thanks to its 16 sites, 30 proximity maintenance centers, 18 Repair and Overhaul Centers, and 90 Field representatives and Field technicians. Microturbo, the subsidiary of Turbomeca, is the European leader in turbojet engines for missiles, drones and auxiliary power units.
This article is listed in :
Bell 505 Jet Ranger X