Helicopter Job Search

Looking for a job ? Post your CV here

Last posts
PT Moncao

Pilot Total Flight Time: 1874h PIC: 1146h SE: 1335h ME: 533h AS350 time: 1100h as350
MY Selangor

Maintenance An individual who specializes in the industry of aircraft maintenance engineering with an education background in aircraft maintenance practices by attending Trainee Aircraft Maintenance Engineer (TAME) DCAM part-66 B1.3 basic training course at Aero precision- Aviation Training Centre (APR – ATC), which is a DCAM part-147 Approved Maintenance Training Organization (ATO). I am poised for challenges and keen to learn from the company in order to become an established Aircraft Maintenance Engineer in the near future.
JO amman

Pilot Helicopter pilot Experiences: Royal Jordanian Air Force & Public security Directorate (Public Security Air Wing) with 24 years on service. - 2000 Flight Hours (fh) on the EC 635 T1 andT2+ - 975 FH on Huey (UH-1H) - 30 FH on BO 105 - 72 FH on BULLDOG (fix wing) * total flying hours 3200 EC135
AU East Lismore

Maintenance I would like to express my interest in applying for a position within your rotary wing maintenance department as a L.A.M.E. I have a broad range of technical knowledge and can happily work autonomously or within a team environment. I have almost 30 years of experience within the aviation industry including two separate long-term roles as Chief Engineer and recently Deputy Maintenance Controller maintaining 2 Class A, Aeromedical Rotary Wing Aircraft. This included on call standby 24/7. My most recent role as floor L.A.M.E included line and heavy maintenance of multiple AW139 Aeromedical aircraft including travel with blocks of 3 weeks. I have experience with WHS policies and procedures as I was also section WHS representative and have been trained in Aviation Maintenance Human Factors. I also hold a commercial working at heights and working in confined spaces tickets. I am willing to undergo any training necessary to become a more suited and versatile member of your maintenance team. I would very much like the opportunity to discuss the possibility of future employment with you further and answering any questions you may have. Sincerely, Craig Hamilton aw139
GR Patra

Maintenance Hellenic Navy 1993-2004. I have an extensive background in inspection, maintenance and repair work, having more than 13 years’ experience as a helicopter mechanic, mostly at the 2nd Hellenic Navy Helicopter Squadron (Sikorsky S-70 Seahawk). Moreover, while my on-the-job experience has afforded me a well-rounded skill set, including first rate communication and interpersonal skills. I excel at: . Completing detailed inspections quickly to maintain service and aircraft safety. . Performing preventative and scheduled maintenance to company standards. . Disassembling, repairing and reassembling aircrafts’ parts. . Dexterity and good eye-hand coordination. . Physical strength. . .Integrity and reliability. . Strong work ethics. In addition to my experience and personal qualities, I have a passion for high standards of service. With my dedication to achieving a productive efficient and reliable quality control team, I believe I would be an excellent addition to your company. Please review my attached resume for additional details regarding my expertise and career achievements. Thank you for your time and consideration. Sincerely, Alexopoulos Petros s-70
UA Kremenchuk

Maintenance OEM Certification: Mi-8, Mi-8MTV-1, Mi-2, AK1-3 helicopters. Professional Experience: 2016/2017 Electrical, instruments and avionics equipment QC on Mi-17 helicopters (V1 and V5 modification), Black Hall Aerospace, Inc., KAF, Afghanistan. 2015/2016 Electrical, instruments and avionics equipment QC on Mi-17 helicopters (V1 and V5 modification), AAL USA, Inc., KAF, Afghanistan. 2012/2015 Avionics Engineer, AAL Group, KAF, Afghanistan. 2010/2012 Head of QC Department of Aviation Technical Base, Kremenchug Flight College of National Aviation University (ATB KFC NAU). Responsibilities: - rotary wing aviation maintenance and quality control, implementation of preventive measures for aircraft serviceability, its efficiency and ensuring the adequate level of flight safety; - control of correct application and protection of diagnostic tools, facilities applied during maintenance works; - control of compliance with the requirements of maintenance schedules; - solving of general issues in regard of maintenance organization with the aviation authorities. mi-8
CO Bogotá

Pilot Helicopter Pilot. 18 years Flying helicopters. 4449 hours B 206. Instructor and pilot in command B-212. Pilot in command, test Pilot. UH-1H, Huey 2, Bell 205 Pilot in command H 500/530 Pilot in command. NVG, special operations, VIP, transport operations. 206
PK Quetta

Pilot Flying Qualifications, S-300C (Single Engine/Piston/ Heli) : Captain, H-1H (Huey) (Single Engine/Turbine/ Utility Heli) : Captain, Bell 412-EP (Multi Engine/Turbine/ Assault Heli) : Captain/VVIP/NVG , MI-17 ( Multi Engine / Turbine/ Cargo Heli) : Co- Pilot 412
EG Cairo

Maintenance • 23 years in Maintenance on BELL 212 Airframe, Systems & Eng. PT6T-3B • 21 years in Maintenance on BELL 206Airframe, Systems & Eng. Alison 250 • 20 years in Maintenance on BELL 412 Airframe, Systems & Eng. PT6T-3DF • 21 years in Boroscope Inspection (Optics and Electronics) • 21 years in Vibration Analysis (RADS-AT & HUMS) • 2 years in Maintenance on AW139 Airframe, Systems & Eng. PT6C- 67C (UNLICESED). • T/Shooting including Electrical systems and Avionics LRU. • Outstations and Remote areas : Handling Maintenance, Paper-work, Stores, Day to Day Maintenance Planning and Managing Client and Company Internal Audits aw139
IN Bangalore

Other Competent, diligent and detail oriented Professional, with 9.6 years of experience in Aerospace industry. Expertise in areas of Product / Process Development / Design / CAD / Simulation / DFMEA / PFMEA / Topology Optimization / Materials and Manufacturing. Significant experience in design for additive manufacturing and forged components, design of process & tooling using AutoCAD, UG-NX-9, CATIA V5, Magics or other high end design packages and in the use of process simulation software Autodesk and DEFORM. Adept at handling the entire gamut of activities related to Aerospace quality & engineering system (AS9100) production planning & control, supplier quality development, supply chain management etc. A dynamic professional with knowledge of using Optical microscopy, Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM), EDAX analysis, chip mechanism, chip microstructure in research projects. Modifying existing design for manufacturing with compliance to GD & T. Familiar with product life cycle management and six sigma techniques. Able to work to agreed objectives and timescales as part of a distributed design & business development team. Support business development & operations activities by producing manufacturing proposals, product, tools and gauge design, models and drawings in line with demand schedules.