For sale

  In movies


  • Helicopter books
  • Books
  • Helicopter patches
  • Patches
  • Oil & Gas
  • Wind Energy
  • Urban air mobility
  • HH-60W
  • Marine One
  • Model kits
  • Model Kits

  • 20
    NEWS | Bell 205

    Wucher Bell 205 for Long Line Cargo Hook Load

    SPAES GmbH & Co. KG installed a power and control box for use of long line load hooks and further systems to optimize external load operation in a Wucher Helicopter Bell 205A-1


    Wucher Bell 205 for Long Line Cargo Hook Load

    SPAES GmbH & Co. KG, August 01, 2018 - Karlsruhe – SPAES GmbH & Co. KG installed with Wucher Helicopter a power and control box for use of long line load hooks and further systems for external load operation at helicopter Bell 204/205.

    The power and control box is mounted at the lower fuselage of the helicopter and supplies the external load cable with power to release and close the load hook.

    The box gives the trigger impulse to open the load hook which is activated by a push button in the stick of the pilot. The long line load hook opens and closes for taking of and setting down loads.

    According to forest fires the control box opens and closes the bambi bucket for unloading process.

    “The requirements of helicopters constantly change. SPAES applied the change / Supplement Type Certificate (STC) at The European Safety Agency (EASA) and implemented the change in its PART 21J design organization”, explains Joachim Schanz, Chief Executive Officer (CEO) of SPAES.

    The installation of the power and control box was implemented in the maintenance center of Wucher Helicoter in Ludesch in Austria. For approval of STC SPAES prepared the installation documents and performed the necessary tests on site of the customer. The EASA approved the STC after closure of tests and fulfilling the certificate.

    Growing company

    SPAES GmbH & Co. KG is a growing company in the field of aviation. As a specialist for technical solutions, SPAES offers products and services for aviation. This includes the design and certification of equipment, own products and systems as well as the integration and approval in aircrafts.

    For aviation companies SPAES provides engineering services and compliance verification. It designs, produces and certifies aviation products according to European Technical Standard Order (ETSO).

    As an EASA Part-21J Design Organization the company offers Supplement Type Certificate (STC), Minor Change and Minor Repair in the field of avionic, cabin interior, structure and electrical systems. SPAES develops installation KIT’s for Minor Change and STC which are integrated in aircrafts by a maintenance organization Part-145. The requirements for design and compliance verification engineers are increasing steadily in aviation. SPAES offers special trainings in the field of small and large helicopters (CS29/27) and small airplanes (CS23).

    Joachim Schanz, Chief Executive Officer (CEO) of SPAES GmbH & Co. KG, founded the company in 2014 in Mannheim. Its headquarters is situated at City Airport in Mannheim. A branch is in Karlsruhe since 2018.

    Aircraft mentioned in this article :
    Bell 205A-1 OE-XHC     ( Wucher Helicopter )

    This article is listed in :
    Bell 205
    Wucher Helicopter



    We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies. MORE INFO           OK