Helifab, February 29, 2016 - Broussard, Louisiana – HELIFAB’s Aft Cabin Area Storage Net for S76A, B, C and D models, is designed to give the operator an alternate area to store cargo when auxiliary fuel tanks are installed.
The maximum amount of cargo allowed within the cabin area cargo net is 500 Lbs, replacing all the cargo carrying capacity lost due to the auxiliary fuel tank installation.
The installation consists of a net secured to the left hand and right hand side panels, roof and floor structure than provides an area for storage in the cabin compartment. The net length is adjustable in order to provide maximum storage area.
“Seat frames and interior trim may remain installed with the storage net on the A, B, C and D models up to S/N 761036 to allow quick reconfiguration in order to carry a full complement of passengers,” explains Mark Evans, Project Manager and DAR at HELIFAB. “D models S/N 761037 and subsequent must have the seats removed.”
For additional information visit Arrow Aviation at Heli-Expo (Booth # 2804) Or email [email protected].
About HELIFAB: HELIFAB, Inc. was founded with the goal of maintaining a close working relationship with its customers in order to identify and implement STCed equipment to support their mission requirements in a timely fashion. Located in the same facility, HELIFAB and Arrow Aviation work in partnership to bring new STC approved products to market. HELIFAB holds Supplemental Type Certificates (STC) and Parts Manufacturer Approval (PMA) for various installations, and the on staff DAR and DER provide an efficient FAA product approval process for development and certification of new product designs or improvements to existing systems.
The maximum amount of cargo allowed within the cabin area cargo net is 500 Lbs, replacing all the cargo carrying capacity lost due to the auxiliary fuel tank installation.
The installation consists of a net secured to the left hand and right hand side panels, roof and floor structure than provides an area for storage in the cabin compartment. The net length is adjustable in order to provide maximum storage area.
“Seat frames and interior trim may remain installed with the storage net on the A, B, C and D models up to S/N 761036 to allow quick reconfiguration in order to carry a full complement of passengers,” explains Mark Evans, Project Manager and DAR at HELIFAB. “D models S/N 761037 and subsequent must have the seats removed.”
For additional information visit Arrow Aviation at Heli-Expo (Booth # 2804) Or email [email protected].
About HELIFAB: HELIFAB, Inc. was founded with the goal of maintaining a close working relationship with its customers in order to identify and implement STCed equipment to support their mission requirements in a timely fashion. Located in the same facility, HELIFAB and Arrow Aviation work in partnership to bring new STC approved products to market. HELIFAB holds Supplemental Type Certificates (STC) and Parts Manufacturer Approval (PMA) for various installations, and the on staff DAR and DER provide an efficient FAA product approval process for development and certification of new product designs or improvements to existing systems.
See also |
Sikorsky S-76
Helicopters Interior Designs EASA Approves HELIFAB S-76 Auxiliary Fuel Tank
Arrow Aviation State of Louisiana 
