Air Evac Lifeteam Adds 7 Bell 206/407 Simulators
All 7 Advanced Aviation Training Devices (AATD) will feature a LongRanger IV glass cockpit with Garmin G500H and GTN650 avionics and a Genesys Aerosystems HeliSAS autopilot
Frasca International, March 02, 2017 - Urbana, IL - Frasca International has sold seven Advanced Aviation Training Devices (AATDs) for the Bell 206/407 series helicopters to Air Evac Lifeteam, the largest independently owned and operated Helicopter Air Ambulance (HAA) provider in the United States.
The seven AATDs will be used by Air Evac to provide recurrent flight training for 600 pilots every four months, on HAA operating procedures and flight in inadvertent instrument meteorological conditions (IIMC).
All seven AATDs will feature a "glass" LongRanger IV cockpit with Garmin G500H and GTN650 avionics and a Genesys Aerosystems HeliSAS autopilot. Two of the simulators will be able to be re-configured in less than an hour to train Bell 407 pilots. Both simulators will have cockpit panels and performance software for the four-blade Bell 407.
"Air Evac has returned to Frasca International for a third time to meet its helicopter pilot training requirements," said John Frasca, President of Frasca International. "The fidelity of our helicopter AATDs will support them in their goals of improving pilot decision-making, reducing aircraft accidents and improving safety through high quality training.”
The Advanced Aviation Training Device (AATD) replicates the flight deck of the Bell 206L4 aircraft and may be used instead of an actual aircraft for a portion of the training time required for an instrument rating and instrument currency.
The order for the seven AATDs was received one year after Air Evac started training with a Frasca Bell 206L4 Level 7 Flight Training Device (FTD) in January 2016 at the Air Evac training center in O'Fallon, MO.
The AATDs feature Frasca's TruVision™ visual system with the same database featured on the level 7 FTD. Frasca also delivered a Frasca TruFliteH 342 FTD to Air Evac in 2005.
Air Evac operates a fleet of approximately 140 Bell 206L4s (or equivalent) and 10 Bell 407s at its 132 bases across 15 states. Six mobile AATDs installed in trailers will be strategically located in Ada, Okla., Danville, Ky., Manchester, Tenn., Forrest City, Ark., Cordele, Ga., and Killeen, Texas. The fixed-base 206L4/407 AATD will be located at the Air Evac training center in O'Fallon, Mo.
All Air Evac new-hire and full-time pilots receive initial and annual recurrent training on the company's Frasca Bell 206 Level 7 FTD which is also equipped with Frasca’s high-fidelity NVG simulation and Motion Cueing System, which has 6 Degree of Freedom (6DoF) motion and vibration to provide critical vestibular feedback to the pilots.
This system makes the simulator fly more realistically and allows the pilot to naturally react to flight motion cues while training.
Air Evac has long had a commitment to training for the safety of its crews and patients. With the Frasca devices, Air Evac will increase the capacity and realism of its training to an unprecedented level, keeping the company on the leading edge of technology and training in simulation, and demonstrating their continued commitment to go above and beyond in pilot training.
About Air Evac Lifeteam: Air Evac Lifeteam, headquartered in O’Fallon, Mo., is the largest independently owned and operated air medical service provider in the United States, with more than 130 air medical bases across 15 states. Air Evac is the leading provider of helicopter air ambulance services to communities in need of rapid medical transport to advanced emergency health care. For more information, please visit www.lifeteam.net, or like us on Facebook.
About FRASCA International: Frasca International, Urbana, Illinois, USA, is a world leader in the design and manufacture of Flight Simulators, Flight Training Devices and Simulation components. Frasca has a proven reputation for delivering high quality simulation equipment and leads the industry in simulation technology such as aerodynamics simulation, flight test, data acquisition, visual systems, NVG simulation, control loading, motion systems, motion cueing, manufacturing & fabrication, electronics design and more. Since its founding in 1958, over 2700 Frasca simulators have been delivered worldwide. Frasca is ISO: 9001 certified.