For sale

  In movies


  • Helicopter books
  • Books
  • Helicopter patches
  • Patches
  • Oil & Gas
  • Wind Energy
  • Urban air mobility
  • HH-60W
  • Marine One
  • Model kits
  • Model Kits

  • 69

    NEWS | HTC Helicopter Technology Company State of California

    EASA Approves HTC Blades for Bell Huey

    California’ Helicopter Technology Company (HTC) granted European Union Aviation Safety Agency (EASA) supplemental type certificate (STC) for its upgraded blades for commercial models Bell Huey 204 ( UH-1B, TH-1F, UH-1F and UH-1P ) and Bell 205 ( UH-1H )


    EASA Approves HTC Blades for Bell Huey

    EASA, November 30, 2020 - Helicopter Technology Company (HTC) is pleased to announce approval of supplemental type certificate 10073531 for the European Union Aviation Safety Agency (EASA).

    This certificate/approval is issued by EASA, acting in accordance with Regulation (EU) 2018/1139 on behalf of the European Union, its member states and of the European third countries that participate in the activities of EASA under Article 129 of that regulation and in accordance with Commission Regulation (EU) No. 748/2012.

    HTC is now offering an upgraded version of their metal main rotor blades for commercial Bell helicopters 204B, 205A, and 205A-1, along with various UH-1 restricted category helicopters.

    The HTC part number 204P2100-103 main rotor blade is a direct replacement for the Bell part number 204-011-250-113 main rotor blade and an upgrade to the HTC part number 204P2100-101 blade.

    The new -103 blade offers a titanium single-piece lower grip plate that is not subject to the current 25-hour special inspection. The existing Bell -113 and HTC -101 configurations have a laminate of aluminum and steel. By changing to the titanium single-piece grip, the possibility of disbonding between the two laminates will be eliminated. The -103 is not subject to the AD 2018-02-07 or AD 2018-02-08 blade inspection that requires inspection every 25 hours or two weeks.

    HTC’s president states, “We recognized that an upgrade was needed to the main rotor blade grips. We chose titanium for greater strength and worked to get it certificated and into production for UH-1 operators. This upgrade will provide greater safety and eliminate the need for the AD that was requiring inspections every 25 hours.”

    Part number 204P2100–103 main rotor blade features:

    - FAA certificated, interchangeable in any combination with BHT 204-011-250-113 blade and the HTC 204P2100-101 blade

    - Titanium single-piece lower grip plate

    - Additional 48-inch (1,219-mm) stainless steel abrasion strip at tip

    - 7075 aluminum alloy spar

    - High visibility paint scheme

    - Main rotor blade life limit of 2,600 hours on: Commercial Bell models 204B, 205A, and 205A-1

    - Restricted category UH-1 models UH-1H,UH-1B (with STC SR00026DE tail boom extension installed), TH-1F, UH-1F, and UH-1P

    Installation of this blade is fully interchangeable and covered by FAA supplemental type certificate (STC) number SR02492LA.

    This article is listed in :
    HTC Helicopter Technology Company State of California
    EASA European Commission
    Bell 204
    Bell 205
    --Helicopters Blades



    We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies. MORE INFO           OK